Plain Taper Attachment for Logan Lathes

(Click on image for larger view)

pl-taper.gif (257584 bytes)

Exclusive "Micro-Screw" feature gives quick, positive adjustments of slide bar to desired taper.  Easily installed, with taper attachment cross slide becoming a permanent part of the lathe.

Part No.
Lathes
Maximum Taper Length at One Setting
Taper per Foot
Maximum Angle
LP-1910 10" 12½" 4" 19º
LP-1911 11" 12½" 4" 19º
LP-1912 12" 12½" 4" 19º
LP-1913 12" 12½" 4" 19º

Note: For 2500 Series Logan Lathes, order LP-1912; for 2900 Series, order LP-1913

Extended cross slide not included in basic unit.  Please call Factory for correct slide.  Be sure to provide Model Number AND Serial Number.

 

Telescopic Taper Attachment for Logan Lathes

(Click on image for larger view)

tel-taper.gif (368908 bytes)

Telescopic cross feed screw eliminates disengaging cross feed screw nut as is necessary with Plain Taper Attachments.

Part No.
Lathes
Maximum Taper Length at One Setting
Taper per Foot
Maximum Angle
LP-2009 12" 10" 4-1/8" 20º
LP-2010 14" 10" 4-1/8" 20º

Note: LP-2009 for 2500 Series Logan Lathes only.  Telescopic Attachment not available for 2900 Series or for 10" or 11" Lathes.

©1998  Logan Actuator Co.
Last Updated 10/08/2003